FAIL (the browser should render some flash content, not this).

Atlantis XR2

The Atlantis XR2 Series Residential Water Softeners are suitable for applications up to 72,000 grains of hardness removal capacity at peak flow rates of up to 21 gpm depending on the system selected.

Operation of The Softener
Hard water contains dissolved minerals in the form of Calcium (Ca), Magnesium (Mg). Removal of these minerals is accomplished by softening the water through an ion exchange process. As water flows through the mineral tank, the dissolved minerals become attached onto and inside the resin. Over a period of time the resin will become saturated with contaminants, and the softener will require regeneration using a sodium or potassium brine solution.
Softening Media - Hydrolyte 525-1
The exchange media is a high quality, FDA certified, commercial grade strong acid softener (Cation) resin in the sodium form (potassium form is available at no extra cost) with a very high whole bead count, no color throw, physically hard, and is moderately chlorine resistant. The media combines high operating capacity with excellent chemical and physical stability for a dependable life when properly maintained.
Controller/Meter
Regeneration of the system is initiated by a simplified electronic control timer, which electronically meters softened water flow to the home and makes decisions to regenerate based on water consumption and program settings.
Regeneration
These softener models are controlled electronically. A fully programmable microprocessor controls Inject Pur-Gard, Up flow Brine/Rinse, Backwash, System Protector, Brine Refill and return to service cycles.

Control Valve
A hydraulically balanced, EPDM diaphragm utilizes a composite drive train. All parts in the waterway are either stainless steel or composite NorylŪ materials for a long and reliable service life.

Resin & Brine Tanks
All models feature a non-corrosive fiberglass resin tank, with a one piece thermoplastic inner liner. The tank has a maximum working pressure of 90 psi and a working temperature up to 120°F. The tank is approved by NSF, UL, FDA, and meets WQA Standard S-100. All fiberglass tanks carry a limited lifetime warranty. An 18 x 33 inch brine tank is included as part of the system. The brine tank is a combination brine maker and salt storage vessel and is made of tough, high-density polyethylene. Larger tanks are available for extra salt storage capacity, if required. Brine tanks 24" diameter and smaller feature a grid plate for maximum saturation of brine.

Brine System
Brine refill is automatically controlled by the computer to provide the exact amount of brine for each regeneration. The Brine System has a float and safety valve shut-off, which minimizes the chance of overflowing the brine tank. All units are equipped with an air check.

Pur-Gard & Pur-Gard Plus
A high-efficiency digitally-controlled Pur-Gard injector & reservoir is included with this system to ensure peak performance and maximum protection from inorganic metals and minerals while maximizing system efficiency.

 
 

  35,000 50,000 72,000
Maximum Capacity 35,000 grain 50,000 grain 72,000 grain
Economy Capacity 21,000 grain 33,000 grain 50,000 grain
Salt used per cleaning cycle (maximum) 12 lbs 18 lbs 24 lbs
Salt used per cleaning cycle (economy) 9 lbs 12.75lbs 17 lbs
Peak flow rate 19 gpm 19 gpm 21 gpm
Water pressure range 50 - 75 psi 50 - 75 psi 50 - 75 psi
Water temperature range 40 - 90 deg. F 40 - 90 deg. F 40 - 90 deg. F
Maximum piping diameter (single tank) 1" 1" 1"
Electrical rating  VAC/Hz 120/60 120/60 120/60
Dimension A - overall system height 53.5" 53.5" 65.5"
Dimension B - system piping height 53.5" 53.5" 65.5"
Dimension C - height of mineral tank 48" 48" 60"
Dimension D - system tank diameter 10" 10" 10"
       
       
       
       

no. of people in home

    1 2 3 4 5 6 7 8 9
  1 - 10 35,000 35,000 35,000 35,000 50,000 50,000 50,000 50,000 50,000
  11 - 15 35,000 35,000 35,000 35,000 50,000 50,000 72,000 72,000 72,000
  16 - 20 35,000 35,000 35,000 50,000 50,000 72,000 72,000 72,000 72,000
  21 - 25 35,000 50,000 50,000 50,000 72,000 72,000 72,000    
  26 - 30 35,000 50,000 50,000 72,000 72,000 72,000      
  31 - 40 35,000 50,000 72,000 72,000 72,000 72,000      
  >40 50,000 50,000 72,000            
    1 2 3 4

number of bathrooms

 
 
 
 

© 1966 - 2007 Intermountain Soft Water, Inc.                         Home     :   Services    :    Solutions    :    Products    :     Terms     :      Search